MC Nylon Tube/Rod/Sheet

MC Nylon is the material comes from the polyreaction processes that build low-molecular compounds together. Since the polyreaction process and moulding happen at the same time, the building period is extended long enough that the molecular weight is greatly increased. Plus, oil solutions is added into the process, MC Nylon not only keeps normal Nylon features, such as (normal Nylon building method can produce low molecular weight
Nylon, but not high molecular weight ones due to difficulty forming caused by bad fluidity) light weight, easy to cut, and high strength, abrasion resistance, but also gains features like extremely abrasion-resistant, self-cleaning, high impact-resistant, and anti-compression. Therefore, commonly used in machinery manufacturing processes, such as manufacturing gears,
bearings, bushings, guide rods, and friction sheets.

Specification :

Pitch p(mm)Length (mm)Width (mm)Thickness (mm)Outer Diameter (mm)
Tube560-1000≥ 1240-300

Properties :

Water Absorption%1.5
Friction Coefficient< 0.45
Rockwell HardnessRHM103-118
Tensile StrengthMpa≥ 70
Elongation @ Break%30-320
Bending StrengthMpa≥ 70
IZOD Impact Strength (no breaking)k J/m2No Breaking
Linear Expansion Coefficient10-5cm/cm℃8.3
Thermal Deformation Temperature (0.46Mpa)150
Breakdown VoltageKV/mm17.3-20.2
Contact Us